info@bioquochem.com(+34) 985 26 92 92

FAQ table

Sample erratic values

Possible cause and recommended solutions: Samples contain interfering substances > Dilute sample further (if possible) Inappropriately stored samples or samples used after multiple freeze-thaw cycles > Use fresh samples or store appropriately until use Samples not deproteinized > Use an appropriate deproteinization protocol Cells/Tissue samples not homogenized completely > Repeat the sample homogenization Inappropriate

2022-10-18T13:38:28+02:00October 18th, 2022||0 Comments

Standard readings do not follow a linear pattern

Possible cause and recommended solutions: Pipetting errors in preparation of standards > Avoid pipetting small volumes (<5 µL) and be careful not to splash from well to well Air bubbles formed in well(s) > Use reverse pipetting technique Standard stock is at incorrect concentration > Always refer to dilutions described in Assay preparation Improperly thawed

2022-10-18T13:40:07+02:00October 18th, 2022||0 Comments

Title

Go to Top